Amsterdam Seed Supply – Not sure when to harvest Marijuana seeds? Look no further – Buy Marijuana seeds – Discreet shipping Harvest is an exciting time when it comes to growing weed, because you finally get to see your trichomes mature. Learn how and when to harvest marijuana. It's every marijuana cultivator's dream: to produce your own cannabis seeds and have a truly home-grown harvest for your next crop.
When To Harvest Marijuana Seeds?
After the whole process of germination, growth and flowering, a lot of growers ask themselves when to harvest Marijuana seeds. Usually, the breeders will include a suggested flowering time for each strain, but as a rule of thumb, Indica marijuana plants harvest in 6-8 weeks while Sativa Marijuana plants take 10-12 weeks.
Look for these signs for when to harvest Marijuana seeds
You can also judge the ripeness of the Marijuana by taking a look at the trichomes; or little hairs/crystals on the flowers and surrounding areas of the Marijuana plant. If they are transparent its still too soon, if they are milky white they are ready and if they turn brown they have become over-ripe. It is also advisable to follow the instructions to harvest Marijuana seeds on the packet since most reputable breeders also have a tried and tested flowering time for optimum ripeness, potency and flavour of a Marijuana strain.
If you meant when to harvest seeds from cross-pollinated Marijuana plants, then the seed will fall from the flower by itself once it is mature and ready to germinate into another Marijuana plant. Usually, as a best practice to harvest Marijuana seeds, some growers wait for the whole flowering cycle to end just as if they were harvesting the flower.
You might find our FAQ Submission How Do I Harvest My Plant? useful
How to harvest marijuana plants
It’s been months since that little weed sprout first popped out of the ground, or you put that delicate clone into some soil. You’ve watched your plants grow and mature, getting bigger and developing buds, and can’t wait to get those buds off the plant and light up.
But not so fast—harvesting cannabis isn’t just cutting down plants and trimming buds; you’ll also need to dry and cure buds before you can smoke them.
There are a few different ways to harvest weed, depending on whether you trim buds wet, straight off the plant, or dry, allowing them to dry first:
- In wet trimming, the plant is cut down, buds are removed off branches—called “bucking”—then trimmed, and then dried, all in one sitting.
- When dry trimming, the plant is cut down and hung to dry for several days; buds are bucked off branches and trimmed when fully dried.
Harvesting is one of the most exciting steps when growing weed, and here’s what you need to know before cutting down your crop.
Overview of how to harvest weed
- Flush plants a week before harvesting
- Determine when to harvest based on trichome color
- Decide if you’ll be wet or dry trimming
- Prepare equipment
- Chop down plants
- Dry and trim plants
Learn more on harvesting weed
Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .
How to know when to harvest cannabis
It’s important to note that every gardener has a different opinion on when to harvest their cannabis plants—some like to harvest early while others prefer later. When you harvest can also depend on other factors in life, such as your schedule, a job, the weather, etc.
Harvesting weed a week early or late probably won’t be the end of the world, but don’t let your plants sit around much longer than that.
When to harvest cannabis according to trichomes
The best way to tell if your marijuana plants are ripe and ready to harvest, both indoors and outdoors, is to look at:
- Stigma: These hair-like strands that cover buds will turn from white to orange and will start to curl.
- Trichomes: The resinous glands all over the plant will turn from clear to opaque and then amber.
The color and clarity of trichomes will tell you when a plant has reached peak maturity and is ready to harvest.
Ripe, healthy trichomes will be sticky and milky white; unripe trichomes will be clear; and overripe or diseased trichomes will be amber or brown. You want to look for milky white trichomes before harvesting.
Keep in mind that top colas might reach maturity faster than bottom buds because they receive more light. You may need to harvest a plant when some buds are ripe and others are under-ripe.
Additionally, information from the breeder or grower can be helpful in getting a rough estimate of when a particular strain should be harvested.
Weed is a warm-season annual, so if growing outdoors, harvest time comes between September and November in the Northern Hemisphere.
There is some variability—growers in Northern California may be able to harvest into November, whereas growers in the Pacific Northwest will likely need to pull their crops down by mid-October, before fall rains set it.
Know your local climate and talk to other growers in your specific area to see when they harvest marijuana.
Tips for determining when to harvest outdoor weed
Strains from regions close to the equator—sativas—need a long, seemingly endless summer to fully ripen, while strains from harsh, cold climates—indicas—tend to finish earlier. That being said, some indicas take a long time to finish and some sativas finish on the early side.
The best time of day to harvest outdoor marijuana plants is in the morning, before the sun blasts them. Ideally, you don’t want them to be wet and dewey, but you don’t want them to under the bright light of the sun, which can degrade terpenes.
You can also harvest at night when the temperature cools off, but the morning is better as plants haven’t been sitting under the sun all day.
Follow the weather
As cannabis buds pack on weight and the season changes from summer to fall, there will be fluctuations in the weather. Depending on your climate, there might be cold snaps or rainstorms.
These aren’t disasters but you do need to keep an eye on the weather and possibly make a game-time decision on when to chop down plants, balancing peak ripeness with conditions that could compromise your harvest.
Harvesting weed in cold temperatures
Most cannabis plants can sail through a light freeze—28-32°F for up to three hours—with no trouble. But a hard freeze, any temps lower or for longer, can spell disaster.
Frost can cause ice crystals to form in plant tissue, damaging their cells. Leaves will appear wilted before turning dark and crispy. The deeper the frost, the more of the plant that will get damaged.
Note that potted plants experience more severe temperature fluctuations than plants in the ground, making the cannabis more susceptible to frost damage.
Similar to a cold snap, rain itself isn’t a huge problem, but the duration and severity of the storm is. If it’s going to warm up and dry out quickly, you can leave almost ripe cannabis to weather the storm. If the rain will be there to stay, mold awaits—cut your losses and harvest before things get soggy.
Covering your plants will help, but there will still be moisture in the air. You can cover plants with a few tall stakes and a tarp, just be sure to remove the cover when the cold or rain passes to let plants warm up and get the sun and air they need.
When growing indoors, plants generally get harvested about 7-9 weeks after flipping them into the first stages of flowering. Some strains may take longer, some shorter; it depends on the strain. Indicas usually finish quicker, while sativas longer.
How often do you harvest weed?
Harvesting indoor marijuana
When growing weed indoors, you can harvest as much or as little as you want. The sky—rather, your grow room—is the limit.
Weed can take anywhere from 3-8 months to grow from seed to harvest, so you can fit in as many as four harvests of smaller plants, or one or two harvests of bigger plants each year.
More harvests mean you’ll have fresh, homegrown weed to smoke more often, but it will also be more work in cleaning up the space between harvests, trimming, etc.
You can even fit in more than four harvests a year if you start with clones or autoflower seeds, both of which shave off some weeks of the grow cycle.
Harvesting outdoor marijuana
By and large, cannabis grown outdoors gets harvested once a year. In most climates, seeds or clones will start in the spring, and you’ll harvest in the fall. In some tropical regions, you can squeeze in a second harvest in a year because of the climate.
You can set up your outdoor weed grow to have more than one harvest a year if you grow autoflower seeds. Autoflower weed plants have a shorter life cycle—they “automatically flower” when they get to a certain age, instead of beginning the flowering stage when sunlight starts to decrease in the sky outdoors.
Because of this, you can start growing a set of autoflowers early in the season, around March or April, harvest them in June or July, and then start growing a second set for harvesting in the fall. You’ll be able to have multiple harvests, but keep in mind that your plants will be smaller because they’re autoflowers.
Light deprivation, or light deps, are another technique to get multiple outdoor harvests in a year. A tarp is placed over a greenhouse to cut off the amount of light outdoor weed plants receive, giving you the ability to control the flowering cycle of plants. As with autoflowers, this will allow you to fit in multiple outdoor harvests in a season.
The drawback to light deprivation is you have to have a greenhouse and other equipment, and you have to place and remove the tarp every day. If marijuana plants receive too much light on even one day, it can confuse them and ruin their flowering and bud production.
Preparing to harvest marijuana
Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .
If you’re growing the same strain, you’ll want to harvest all your cannabis plants in the same window of time because they’ll all ripen at the same time.
If you’re growing multiple strains, they may ripen at different times. But you may still want to harvest all strains at once to get trimming done all in one sitting, just keep in mind that some strains might get harvested on the early side and some on the late side.
Before you harvest, you’ll also need to know if you are going to trim wet or dry. Wet trimming involves trimming buds immediately after the plant is cut down, and with dry trimming, chopped plants are hung up to dry for several days before trimming.
It’s also a good idea to flush your plants a week before harvesting—give them only water to clear out the nutrients.
What do trichomes look like when they’re ready to harvest?
Trichomes will be sticky and milky white when ready to harvest.
When looking at trichomes you’ll need a microscope. Handheld microscopes ranging from 30x-100x will work and can be purchased at any growing supply store.
During their change from clear to opaque to amber, trichomes reach their maximum THC content. After that, they begin to break down due to exposure to oxygen and UV rays.
What happens if you wait too long to harvest?
Waiting a week or two after a plant’s peak maturity to harvest isn’t the end of the world, the plant might just lose some THC. Busy schedules or too many plants to harvest and cause growers to delay harvesting plants for a little bit.
If you wait for a long time, several weeks or more, the plant will likely dry out and the buds shrink. The plant may start to rot and develop mold, especially in an outdoor environment and in cold climates.
Equipment needed to harvest cannabis
To harvest weed, you’ll need the following tools:
- Scissors (for trimming buds)
- Pruners (helpful for big branches)
- Comfortable chair and area
- A clean surface, like a table
- Tray or bowl
- Rubbing alcohol
- Clothes that can get dirty and sticky
- Optional: Non-powdered latex gloves
Make sure scissors are ergonomic and will fit comfortably in your hand, as you will be holding these bad boys for quite a while. With time, these scissors will get very sticky, so get a pair that will clean easily, or buy two pairs so you can switch between them.
There are many types of scissors you can buy; some are spring-loaded, some not. Beginners often go for spring-loaded ones because they seem quicker.
However, a lot of trimmers recommend Chikamasa scissors—these are not spring-loaded and might take a day or two to get used to, but you will soon notice the precision and speed they provide.
You may also want to invest in a larger pair of shears for cutting branches. Save the scissors for the more precise work.
Comfortable chair and area
Give yourself plenty of space and have an ergonomic setup so you can settle in for a long trim. Pick a cool place with plenty of light, and try to stay away from places with excess dust, hair, or particulates, which can contaminate the weed.
The longer you sit, the more work you get done, so find a comfy chair. Avoid anything that makes you hunch over and compresses your lower back.
Tray/bowl and a clean surface
Many trimmers opt for trimming trays because they are much easier to transport and can make a great lap companion. We recommend something that has a screen for collecting kief. The simpler the design the better.
You can also just trim onto a flat table and put your finished buds in a bowl.
Whatever you choose, make sure the surface is easy to clean.
Rubbing alcohol and rags
Trimming scissors will inevitably get gunked up with resin, so you’ll need to clean them or switch them out with a fresh pair periodically. Keep a rag and a cup with rubbing alcohol handy.
Clothes that can get dirty and sticky
Wear old clothes you don’t care about or an apron. Better yet, wear a silk apron—the resin won’t stick to silk and your laundry will thank you.
Gloves are also great to keep your hands resin-free. If you don’t like trimming with gloves on, you can rub coconut or olive oil on your hands to prevent resin buildup.
A long trim session can seem even longer without anything to pass the time. Staying entertained is crucial to your sanity when trimming. Anything that doesn’t require visual attention is recommended, such as music, podcasts, audiobooks, and stand-up comedy.
Tips for a successful marijuana harvest
Once your plants are ready for harvesting and you have all your equipment, it’s time to chop down your plants.
With dry trimming, chopped plants are hung up to dry for several days before trimming.
Wet trimming involves trimming buds immediately after the plant is chopped down.
Either way, to chop down plants, grab a large pair of shears and start cutting off big branches, making sure to be delicate with the buds. If plants are small, you may be able to cut them directly at the base, above the soil.
If dry trimming, it’s helpful to cut branches in a way to give them a hook on one end, making it easy to hang them. If wet trimming, cut branches so they’re easy to handle and snip buds off of.
- Make sure to flush your plants with only water, no nutrients, for about a week before harvesting
- Check trichomes on plants to make sure they’re ready to get chopped down
- Wear clothes that can get dirty—harvesting weed is sticky
- Keep shears and scissors sharp
- It’s good to harvest before plants get too hot—outdoors, this means harvesting in the morning; indoors, harvest soon after the lights come on
- If growing different strains, some plants may be ready to harvest before others
- If wet trimming, be sure to trim buds immediately after chopping down plants
Now that you’ve harvested your weed, what comes next? Learn how to trim, dry, and cure your marijuana harvest.
How to Harvest Your Own Cannabis Seeds
Congratulations! You’ve mastered the art of growing your own marijuana plants from seed and clone, and you’ve succeeded in bringing in a number of fruitful harvests. Perhaps you’ve even found a couple of strains along the way whose plants produce such a scrumptious bud that you have a new goal in mind: to produce your own cannabis seeds and have a truly home-grown harvest for your next crop
Table of Contents
Woah There, Tiger
As with most forms of sexual reproduction, in order to produce marijuana offspring (or cannabis seeds), you need a male and female plant. A male plant can produce pollen, which acts as a fertilizing agent in female plants, around two weeks before a female plant is ready to receive it. Because of this difference in sexual maturity, it is important to keep your male plant alive and thriving as you wait for your female plant to reach maturation. You can do this by pruning the male’s quick-growing buds and allowing the slower-growing flowers time to mature at a more leisurely pace.
When the Moment’s Right
Once the female plant has begun to produce flowers of a decent size with a number of long hair-like pistils, she is ready to receive the male plant’s pollen. There are two ways to approach the actual pollination stage: you can stick male and female together and let nature take its course, or you can manually pollinate specific female branches.
The first option is the easiest up front, but will ultimately take the most effort on the part of the grower. Essentially, when both male and female plants have reached maturation, you should place them next to each other and shake the male plant. This shaking will encourage a release of pollen, which will spread around the air and land throughout the female plant. Repeat this step once or twice a day for two days to ensure fertilization.
If the female plant is fertilized this way, there is no way to control how many cannabis seeds are produced, or where on the plant they come from. When it is time to harvest, you will notice that most, if not all, of your bud has a plethora of seeds buried within. In addition to being a lot of work, this mass production of seeds can be very wasteful. Growers may not have enough room to plant all of the seeds, and the leftover bud will be less robust due to the female plant’s energy being put into seed production.
Doing It by Hand
The second, more popular option is to pollinate specific branches on the female plant with pollen from the male. Before you get down to the dirty deed, you need to put in some prep time for both the male and female plants. First, turn off all fans and air circulation devices. For the female, prune the lower branches as well as the fan leaves that surround the branch or branches that you wish to pollinate. After preparing the female plant, clip off some of the more attractive and full-looking flowers from the male plant and place them in long paper wine bags (at least one good-sized flower per bag).
Now it’s time to pollinate. Carefully slide the paper bag with male flower around the prepared branch of the female plant. When the entire branch is covered, tightly close the end of the bag at the base of the branch using a zip-tie, string, or tape that will peel easily (such as masking tape or painter’s tape). Once the bag is secured, shake it strongly to encourage the spread of the pollen. Over the next couple of hours, repeat the shaking process one to two more times.
When removing the bag after pollination, be careful not to jostle the branch or the flower inside the bag. This could lead to accidental fertilization of other branches on your female plant (or surrounding plants). Although this requires more specific and detailed work up front, you will thank yourself later. This method of fertilization will provide you with enough seeds to plant for your next crop, while not overwhelming your female plant with seeds in every bud.
Bun’s in the Oven
Now you play the waiting game. Continue caring for and pruning your growing plants, and keep an eye on your female for the signs of fertilization. Once pollinated, most cannabis seeds will fully ripen within 4 to 6 weeks. You should expect to leave your fertilized flower on the plant longer than the bud that is not fertilized.
A ripened seed is structurally sound and dark brown or tan in color, often (but not always) with obvious stripes along the outside. The harvesting process is relatively simple. Simply dig into the fertilized flower and pull out the seeds. Don’t worry about messing up your bud harvest: female flowers that have been fertilized expend a lot more effort into growing seeds than producing THC, so the fertilized bud will not be nearly as potent to consume as the rest of the plant. (Of course, you can still use the seedless fertilized flower for shake, melting into butter, or making other edibles.)
The Circle of Life
Once you harvest your cannabis seeds, the next step is to plant them and start the entire process over again. If you’re not ready to start a new crop just yet, don’t worry. You can freeze the seeds and they will retain their ability to germinate.